Sunday, January 9, 2022

Informatica 10.5 Installation Steps: Part 4 - Informatica 10.5 Installation Steps

 


tar -xf informatica_1050_server_linux-x64.tar


:~/software/infa> ls -ltr

total 14768476

drwxr-xr-x 2 infadevusers        4096 Mar 18 03:39 Messages

drwxr-xr-x 7 infadevusers        users          95 Mar 18 03:39 Server

-rwxr-xr-x 1 infadevusers        users       30014 Mar 18 03:39 install.sh

-rw-r--r-- 1 infadevusers        users       17725 Mar 18 03:39 SilentInput_upgrade_NewConfig.properties

-rw-r--r-- 1 infadevusers        users        8925 Mar 18 03:39 SilentInput_upgrade.properties

-rw-r--r-- 1 infadevusers        users       53153 Mar 18 03:39 SilentInput_configure_DAA.properties

-rw-r--r-- 1 infadevusers        users       55297 Mar 18 03:39 SilentInput_configure.properties

-rw-r--r-- 1 infadevusers        users       12041 Mar 18 03:39 SilentInput_Standalone_DPM.properties

-rw-r--r-- 1 infadevusers        users       26717 Mar 18 03:39 SilentInput_EDP.properties

-rw-r--r-- 1 infadevusers        users       85749 Mar 18 03:39 SilentInput_Default.properties

-rw-r--r-- 1 infadevusers        users        1756 Mar 18 03:39 SilentInput_DT.properties

-rw-r--r-- 1 infadevusers        users       66145 Mar 18 03:39 SilentInput_DPM.properties

-rw-r--r-- 1 infadevusers        users       75232 Mar 18 03:39 SilentInput_DAA.propertiescd in          

-rw-r--r-- 1 infadevusers        users       81788 Mar 18 03:39 SilentInput.properties

drwxr-xr-x 3 infadevusers        users          68 Mar 18 03:39 upgrade_utils

-rwxr-xr-x 1 infadevusers        users        5545 Mar 18 03:39 unjar_esd.sh

-rwxr-xr-x 1 infadevusers        users       20228 Mar 18 03:39 silentinstallDT.sh

-rwxr-xr-x 1 infadevusers        users       21840 Mar 18 03:39 silentinstallConfig.sh

-rwxr-xr-x 1 infadevusers        users       22354 Mar 18 03:39 silentinstall.sh

drwxr-xr-x 6 infadevusers        users         283 Mar 18 03:39 properties

drwxr-xr-x 4 infadevusers        users          29 Mar 18 03:39 saptrans

drwxr-xr-x 4 infadevusers        users          29 Mar 18 03:39 sapsolutions

drwxr-xr-x 3 infadevusers        users          58 Mar 18 03:39 webui

drwxr-xr-x 3 infadevusers        users         232 Mar 18 05:02 source

drwxr-xr-x 4 infadevusers        users          37 Mar 18 05:02 pluginjars

-rwxrwxrwx 1 infadevusers        users 15122298880 Jun 10 21:51 informatica_1050_server_linux-x64.tar




infadevusr@ip-10-10-100-200:~/software/infa> ./install.sh



\***************************************************************************

\* Welcome to the Informatica 10.5 Installer.  *

\***************************************************************************




Before you continue, read the following documents for version 10.5:

* Informatica Installation Getting Started Guide, Upgrade Guide, What’s New and Changed, and Release Notes.





Do you want to continue? (Y/N)Y

 The installer requires operating system Linux kernel version 3.12 and later.



Select one of the following options to install or upgrade:


1. Install and configure Informatica version 10.5 products.

 Choose this option if one or more of the following conditions is true:

 * You want to install and configure Informatica domain services. You can install:

   - Only traditional products such as PowerCenter and Informatica Data Quality

   - Only the Data Engineering products for Integration, Quality, and Streaming

   - Traditional products and the aforementioned Data Engineering products

 * You want to install Enterprise Data Catalog. You can install:

   - Enterprise Data Catalog binaries in an existing domain

   - Data Engineering products and Enterprise Data Catalog

 * You want to install Enterprise Data Preparation. You can install:

   - Enterprise Data Preparation binaries in an existing domain with Enterprise Data Catalog

   - Enterprise Data Catalog and Enterprise Data Preparation binaries in an existing domain

   - Data Engineering products, Enterprise Data Catalog, and Enterprise Data Preparation

 * You want to install Data Privacy Management. You can install:

   - Data Privacy Management in an existing domain with Enterprise Data Catalog

   - Data Engineering products, Enterprise Data Catalog, and Data Privacy Management



2. Upgrade Informatica products to version 10.5.

 Choose this option if one of the following conditions is true:

 * You want to upgrade a previous version of Informatica domain and application services. You can upgrade:

   - Only traditional products such as PowerCenter and Informatica Data Quality

   - Only the Data Engineering products for Integration, Quality, and Streaming

   - Traditional products and the aforementioned Data Engineering products

 * You want to upgrade to Enterprise Data Catalog version 10.5. When you choose this option, the installer upgrades the domain and the Enterprise Data Catalog binaries.

 * You want to upgrade Enterprise Data Preparation and Enterprise Data Catalog. When you choose this option, the installer upgrades the domain, the Enterprise Data Catalog binaries, and the Enterprise Data Preparation binaries. The binaries are installed if Enterprise Data Preparation is not installed.

 * You want to upgrade to Data Privacy Management version 10.5. When you choose this option, the installer upgrades the domain, Enterprise Data Catalog, and Data Privacy Management binaries.



3. Configure the Enterprise Data Catalog or Enterprise Data Preparation version 10.5 services on a node in the domain. Choose this option if you installed the binaries and one of the following conditions is true:

 * You want to configure Enterprise Data Catalog services on a node in the domain.

 * You want to configure Enterprise Data Preparation services on a node in the domain with Enterprise Data Catalog.


4. Install or upgrade Data Transformation Engine.


Choose an installation option(1 or 2 or 3 or 4):1


-----------------------------------------------------------

Checking for an Informatica 10.5 installation.

To verify whether the machine meets the system requirements for the Informatica installation or upgrade, run the Pre-Installation System Check Tool before you start the installation or upgrade process. Informatica recommends that you verify the minimum system requirements.



Select one of the following options:

1. Run the Pre-Installation System Check Tool (i10Pi).

2. Run the Informatica Kerberos SPN Format Generator.

3. Run the installer.

(Default: 3)3

Preparing to install

Extracting the installation resources from the installer archive...

Configuring the installer for this system's environment...

Picked up _JAVA_OPTIONS: -Djava.io.tmpdir=/tmp



******************************************************************************************************

Welcome - Step 1 of 16

******************************************************************************************************

[ Type 'back' to go to the previous panel or 'help' to check the help contents for this panel or 'quit' to cancel the installation at any time. ]



Copyright (c) 1993-2021 Informatica LLC. All Rights Reserved.

See patents at  https://www.informatica.com/legal/patents.html




Subject to your opt-out rights described below, the Software will automatically transmit to Informatica in the USA information about the computing and network environment in which the Software is deployed and the data usage and system statistics of the deployment.  This transmission is deemed part of the Services under the Informatica privacy policy and Informatica will use and otherwise process this information in accordance with the Informatica privacy policy available at http://www.informatica.com/privacy-policy.html. You may disable this transmission in the Administrator tool, Help > About Informatica Administrator > Usage Collection Policy > uncheck [ Enable Usage Collection ].


I agree to the terms and conditions.

    * 1->No

      2->Yes

(Default: 1):2



******************************************************************************************************

Component Selection - Step 1A of 16

******************************************************************************************************

[ Type 'back' to go to the previous panel or 'help' to check the help contents for this panel or 'quit' to cancel the installation at any time. ]




Select one of the following installation options for version 10.5:

    * 1->Install and configure Informatica domain services. You can install:

        -Only traditional products such as PowerCenter and Informatica Data Quality

        -Only the Data Engineering products for Integration, Quality, and Streaming

        -Traditional products and the aforementioned Data Engineering products

        -Test Data Management is installed with both traditional and Data Engineering products.


Select this option to install version 10.5 Informatica domain services and the application service binaries to support Data Engineering Integration and Data Engineering Streaming.

      2->Install and configure Enterprise Data Catalog. You can install:

        -Enterprise Data Catalog binaries in an existing Informatica domain. After you install the binaries, you can run the installer again to configure the services.

        -Data Engineering products and Enterprise Data Catalog

      3->Install and configure Enterprise Data Preparation. You can install:

        -Only Enterprise Data Preparation binaries in an existing Informatica domain with Enterprise Data Catalog. After you install the binaries, you can run the installer again to configure the services.

        -Enterprise Data Catalog and Enterprise Data Preparation binaries in an existing Informatica domain. After you install the binaries, you can run the installer again to configure the services.

        -Data Engineering products, Enterprise Data Catalog, and Enterprise Data Preparation.

      4->Install and configure Data Privacy Management. You can install:

        -Data Privacy Management in an existing Informatica domain with Enterprise Data Catalog.

        -Data Engineering products, Enterprise Data Catalog, and Data Privacy Management.

(Default: 1):1


Do you want to enable Kerberos network authentication for the Informatica domain?

    * 1->No

      2->Yes

(Default: 1):



******************************************************************************************************

Installation Prerequisites - Step 2 of 16

******************************************************************************************************

[ Type 'back' to go to the previous panel or 'help' to check the help contents for this panel or 'quit' to cancel the installation at any time. ]


Verify the installation prerequisites and complete the

pre-installation tasks before you continue.


Disk space: 50 GB


Memory (RAM): 8 GB


Number of CPU cores: 8


Database requirements for the domain configuration repository:

- Verify the database version.

- Verify the database user account. The account must have the following permissions on the domain configuration repository database:


- Create tables and views.

- Drop tables and views.

- Insert, update, and delete data.


Pre-installation Tasks

- Get the Informatica license key.

- Verify the minimum system requirements.

- Set the environment variables.

- Verify the port availability.

- Set up the keystore file if you do not want to use the default keystore file.

- Download and extract the Informatica installer files.


Press <Enter> to continue ...



******************************************************************************************************

Deployment Type Tuning - Step 2A of 16

******************************************************************************************************

[ Type 'back' to go to the previous panel or 'help' to check the help contents for this panel or 'quit' to cancel the installation at any time. ]



If you are installing Data Engineering products or Enterprise Data Catalog, the installer can tune the application services for better performance based on the deployment type in your environment. If you do not tune the services during installation, you can tune the services later through infacmd.


The installer cannot tune the PowerCenter services. If you are installing PowerCenter, press 1 to continue without tuning.

Do you want the installer to tune the services?

    * 1->No

      2->Yes

(Default: 1):



******************************************************************************************************

License and Installation Directory - Step 3 of 16

******************************************************************************************************

[ Type 'back' to go to the previous panel or 'help' to check the help contents for this panel or 'quit' to cancel the installation at any time. ]



Enter the installation directory (default:- /home/infadevusr): /infahome/informatica/10.5


Enter the path to the license key file (default:- /home/infadevusr/license.key): /home/infadevusr/software/INFA_License_Keys/xxx_AG_AE_DQAE_v105_US_HUB_DEV1_17744_211972.key


Installation environment:

    * 1->Sandbox

      2->Development

      3->Test

      4->Production

(Default: 1):2


Warning: Informatica Services are already installed in the directory.

Select OK to change the directory location.

 Or, select Continue to overwrite the existing installation.


Select a choice

    * 1->OK

      2->Continue

(Default: 1):2



******************************************************************************************************

Pre-Installation Summary - Step 4 of 16

******************************************************************************************************

[ Type 'back' to go to the previous panel or 'help' to check the help contents for this panel or 'quit' to cancel the installation at any time. ]



Product Name             :      Informatica 10.5


Installation Type        :      New Installation


Installation Directory   :      /infahome/informatica/10.5


Disk Space Requirements:


Required Disk Space      :      22,934 MB


Available Disk Space     :      211,536 MB


Press <Enter> to continue ...



******************************************************************************************************

Installing

******************************************************************************************************



Installing... 1%


Installing... 2%


Installing... 5%


Installing... 10%


Installing... 15%


Installing... 20%


Installing... 25%


Installing... 30%


Installing... 35%


Installing... 40%


Installing... 45%


Installing... 50%


Installing... 60%


Installing... 65%


Installing... 70%


Installing... 75%


Installing... 80%


Installing... 90%


Installing... 95%


Installing... 100%


******************************************************************************************************

Domain Selection - Step 5 of 16

******************************************************************************************************

[ Type 'back' to go to the previous panel or 'help' to check the help contents for this panel or 'quit' to cancel the installation at any time. ]




Do you want to create a domain or join a domain?

    * 1->Create a domain.

      2->Join a domain.

(Default: 1):


Do you want to enable secure communication for the domain?

    * 1->No

      2->Yes

(Default: 1):

      1->Enable HTTPS for Informatica Administrator.

    * 2->Disable HTTPS

(Default: 2):1


Port (default:- 8443):



Select the keystore file to enable secure communication for the domain in the Administrator tool:

    * 1->Use the default keystore generated by the installer.

      2->Specify the location and password of a custom keystore file.

(Default: 1):


Do you want to enable Security Assertion Markup Language (SAML) authentication?

    * 1->No

      2->Yes

(Default: 1):


Generating the keystore...

-


******************************************************************************************************

Domain Configuration Repository - Step 6 of 16

******************************************************************************************************

[ Type 'back' to go to the previous panel or 'help' to check the help contents for this panel or 'quit' to cancel the installation at any time. ]



Enter database information for the domain configuration repository.


Database type:

    * 1->Oracle

      2->SQLServer

      3->DB2

      4->Sybase

      5->PostgreSQL

(Default: 1):


Database user ID (default:- na_105_domain_dev): domain_dev


Database user password:


Configure the database connection:

    * 1->Enter the JDBC URL.

      2->Enter the JDBC connection string.

(Default: 1):


Database address (default:- dcawsxxxnainfarepidqrds.cetrhskdgder.us-east-1.rds.amazonaws.com:1521): dcawsxxxnainfarepidqrds01.cetrhskdgder.us-east-1.rds.amazonaws.com:1521


Database service name (default:- DNARPIDB): ORCL


Do you want to configure JDBC parameters?

    * 1->Yes

      2->No

(Default: 1):


JDBC parameters (default:- MaxPooledStatements=20;CatalogOptions=0;BatchPerformanceWorkaround=true):



******************************************************************************************************

Domain Security - Encryption Key - Step 7 of 16

******************************************************************************************************

[ Type 'back' to go to the previous panel or 'help' to check the help contents for this panel or 'quit' to cancel the installation at any time. ]



Encryption key directory (default:- /infahome/informatica/10.5/isp/config/keys):


A unique site key is generated. If you lose the site key, you cannot generate the site key again. Make sure that you save a copy of this key and do not share the unique site key with others.

Specify if you want to backup the site key that the installer generates or not:

    * 1->No

      2->Yes

(Default: 1):


Error: Please confirm that the backup will be taken once siteKey is generated.


Select a choice

    * 1->OK

(Default: 1):



******************************************************************************************************

Domain Security - Encryption Key - Step 7 of 16

******************************************************************************************************

[ Type 'back' to go to the previous panel or 'help' to check the help contents for this panel or 'quit' to cancel the installation at any time. ]



Encryption key directory (default:- /infahome/informatica/10.5/isp/config/keys):


A unique site key is generated. If you lose the site key, you cannot generate the site key again. Make sure that you save a copy of this key and do not share the unique site key with others.

Specify if you want to backup the site key that the installer generates or not:

    * 1->No

      2->Yes

(Default: 1):2


Information: The encryption key gets generated in a file named siteKey in the following location:

/infahome/informatica/10.5/isp/config/keys


Press <Enter> to continue...



******************************************************************************************************

Domain and Node Configuration - Step 8 of 16

******************************************************************************************************

[ Type 'back' to go to the previous panel or 'help' to check the help contents for this panel or 'quit' to cancel the installation at any time. ]



Enter the following information for the Informatica domain.


Domain name: (default:- Domain): nainfasrvcsdev1


Node host name: (default:- ip-10-10-100-200.ec2.internal): dnainfaserver.xxx-na-dev.us-east-1.aws.cloud.xxx


Node name: (default:- node01): node1_nainfasrvcsdev1


Node port number: (default:- 6005):


Domain user name: (default:- Administrator):


You can choose to enable the password complexity to secure sensitive data in the domain.


The password must meet the following requirements:

It must be at least eight characters long and contain at least one alpha character, one numeric character, and one special character.


Do you want to enable the password complexity?

      1->Yes

    * 2->No

(Default: 2):


Domain password:


Confirm password:


Do you want to display the advanced port configuration page?

    * 1->No

      2->Yes

(Default: 1):2


Do you want to configure Informatica services and connections? Informatica services include the Model Repository Service, Data Integration Service, Content Management Service, PowerCenter Repository Service, and PowerCenter Integration Service. Informatica connections include profiling warehouse connection and the connections associated with the cluster configuration.

    * 1->Yes

      2->No

(Default: 1):2



******************************************************************************************************

Port Configuration - Step 8A of 16

******************************************************************************************************

[ Type 'back' to go to the previous panel or 'help' to check the help contents for this panel or 'quit' to cancel the installation at any time. ]



Enter the port numbers for the Service Manager and Informatica Administrator.


Service Manager shutdown port: (default:- 6007):


Service Manager port: (default:- 6006):


Informatica Administrator port: (default:- 6008):


Informatica Administrator shutdown port: (default:- 6009):


Minimum port number: (default:- 6014):


Maximum port number: (default:- 6114):


Generating encryption key...

-

Defining the domain...

-

Registering the plug-in...

-

Starting the service...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...

-

Pinging the domain...



******************************************************************************************************

Post-Installation Summary - Step 16 of 16

******************************************************************************************************

Installation Status: Succes


The Informatica 10.5 installation is complete.


The system services are disabled by default after the installation.

Configure and enable the system services in the Informatica Administrator.




For more information, see the debug log file:

/infahome/informatica/10.5/Informatica_10.5_Services_2021_06_23_20_34_36.log


Installation Type: New Installation



Informatica Administrator Home Page:

http://dnainfa.nadev.us-east-1.aws.cloud.xxxx:6008


Product Name:  Informatica 10.5



Press <Enter> to continue ...



1 comment:

  1. I really like your blog, that’s a very informative article…. thanks for sharing!!!!!!
    Blockchain in Finance Developers

    ReplyDelete